Intelligent Network Transmitter(Video Server) - INT400
With the Intelligent Network Transmitter 400 (INT400), IDIS provides an advanced solution for retrieving video over computer networks, including the Internet. The INT400 grabs composite video images from four inputs, compresses them, and then transmits them over computer networks or telephone lines at speeds up to 30 frames per second.
In addition to video access, the INT400 provides audio and alarm information from the remote site. There are four sensor inputs and one alarm input.
The user can listen in on the remote site with the audio input. The INT400 is capable of controlling pan, tilt, zoom, and focusing cameras remotely. All of the INT400 features are accessible through Internet web browsers, allowing users to access and control their systems any time from virtually anywhere.
 System Configuration
Features
 Monitor live video images transmitted in real-time
- Remote monitoring up to 30fps live video images by using IDIS's unique algorithm Low band width
requirements: 3KB per second typical
- Three-levels of input resolution: 640x480, 320x240, 160x120
- Four-levels of image compression
Simultaneous video and audio signal transmission
- Monitor voices and background sounds via one audio input
Supports various network environments
- Ethernet or Fast Ethernet interface for Internet
- Modem interface for standard telephone lines
Easy software upgrades from anywhere
- Upgrading software at a remote site by using a web browser
E-mail transmission ensures important events are not missed
- Video can be transmitted to assigned e-mail addresses whenever sensors detect input signals
- Individual management by assigning different e-mail addresses for each camera
Additional convenient features
- Four digital sensor inputs and one alarm output
- RS-232/485 interface for Pan/Tilt/Zoom/Focus control
- Four video loop-through terminals
- Each function can be set remotely by using web browser
Compatible with IDIS products
- As a POST system for advanced digital video recording systems like IDR X016 and HDR 5016
- As a POST system for a remote monitoring software such as SmartBase
Applications
Remote Monitoring System
- Factory / Construction Site / Warehouse / Office
- ATM
- Zoo / Pet Care
- Vacation Home / Ship / Parking Lot
Live Video Image Transmission System
- Retirement Village / Kindergarten
- Shopping Mall
- Sightseeing Resort
- Traffic Flow
Specifications
INT400
| Power Source |
12 VDC, 1.0A |
| Power Consumption |
8 Watts |
| Video In |
4 (NTSC or PAL) |
| Image Resolution |
Selectable : 640×480, 320×240, 160×120 |
| Compression |
ML-JPEG or JPEG (Programmable compression ratio) |
| Performance |
Single
Quad |
Max 30 frame/sec
Max 24 frame/sec |
| Audio In |
1 channel |
| Browser |
Web browser (ActiveX) or Monitoring software |
| Alarm In / Out |
Alarm In
Alarm Out |
4
1 |
| Dimension (WxHxD) |
220×44×137 mm (8.67"×1.73"×5.39) |
| Weight |
1.5 kg (3.3 Ibs) |
| Connection |
Video input : 1 Vp-p 75 Ohm Comp(4 ch.)
Video output : 1 Vp-p 75 Ohm Comp(4 ch. loop through)
Audio input
LAN : 10/100 Base-T Ethernet I/F
Serial port : RS-232
PTZ control : RS-422/485 |
4 BNC
4 BNC
1 RCA
RJ-45
DB-9
Terminal board |
| Misc. |
RS-232
Network Protocol
Security
Alarm E-mail Capabillity
Motion Detection |
Control or Modem
TCP/IP, HTTP, SMTP
Password
Yes
Yes |
|
|
|
